Flex FLC Coping Manual do Utilizador descarregar pdf

Flexcap FLC Coping

Tapered, Flat and Existing Slope with Nailer Versions

Warranty:

The entire roof system is covered under one warranty and inspected after the project is complete to

assure proper installation. The system is inspected after the project is complete to assure proper

installation. This ensures protection for the most vulnerable area of the roof against failure due to

extreme wind up lift pressures.

Testing:

• Tested per ANSI/SPRI ES-1 Standard to comply with the International Building Code.

“ Factory Mutual 1-90 approved for wind up lift protection.

• Miami-Dade Approved (No. 08-0604.02 12/11/13) to comply with the “High Velocity Hurricane

Zone of the Florida Building Code”.

Available Materials:

Its unique design allows for covers to be manufactured in 24 ga. steel, .040", .050" and .063"

aluminum.

Watertight:

Its 8" wide concealed splice plates with dual non-curling isocryl butyl sealant strips allow for thermal

movement of materials and provides a watertight seal at all joints.

Competitively Priced:

The installed cost rivals even light gauge roof edge systems fabricated locally or in a roofer’s shop.

Efficient Design:

A fuU, snap-on design in 12'-0" lengths and no crimping make for quick installation and low labor

costs. Pre-punched fastening holes ensure proper attachment to the building substrate. Corrosion

resistant, stainless steel springs are factory attached to the anchor clips and provide long-term,

positive spring loading. No adhesives are required.

Colors:

Choose among a wide range of standard colors and finishes that meet your job requirements. A 20

year Kynar 500® finish warranty is included on standard colors. Custom post-coated Kynar 500

colors are available with an included 10 year Kynar 500 finish warranty or a 20 year Kynar 500 finish

warranty is available upon request. Anodized finishes are also available, but are not warranted.

Custom Capabilities:

Radius and specially fabricated products are available to meet the unique needs of each project.

Accessories:

Factory fabricated miters provide a cleaner, more aesthetically pleasing appearance. This eliminates

the need for field fabrication, providing time and labor savings.

Also Included:

All fasteners are included and will arrive to the job site with the product.

p: 800-969-0108

f: 610-916-9501

features & benefits

1 2 3 4 5 6 ... 12 13

Resumo do Conteúdo

Página 1

Flexcap FLC CopingTapered, Flat and Existing Slope with Nailer VersionsWarranty:The entire roof system is covered under one warranty and inspected aft

Página 2

FLEXCAP FLC COPING MITERSWELDED POST-FINISHED MITER ASSEMBLYCustomer ServicePhone: 800-969-0108Fax:610-916-9501DATE: 12/13/10DRN BY: JJCCKD BY: SAKSHT

Página 3

FLEXCAP FLC COPING ENDCAPSQUICKLOCK ENDCAP ASSEMBLYSTANDARD ENDCAP LENGTH IS 18’Customer ServicePhone: 800-969-0108Fax:610-916-9501DATE: 12/13/10DRN B

Página 4

FLEXCAP FLC COPING ENDCAPSWELDED PRE-FINISHED ENDCAP ASSEMBLYdetail82p: 800-969-0108f: 610-916-9501

Página 5

FLEXCAP FLC COPING ENDCAPSWELDED POST-FINISHED ENDCAP ASSEMBLYp: 800-969-0108f: 610-916-9501detail83

Página 6

Página 7

APPROVE)FLEXCAP FLC COPINGTAPERED VERSIONANSI/SPRI ES-1 TESTEDCoping cover 12'-0' (3.65 m) lengths8" (203 mm) wide concealed splice pla

Página 8

sAPPROVEDFLEXCAP FLC COPINGFLAT VERSIONANSI/SPRI ES-1 TESTEDCoping cover 12'-0" (3.65 m) lengths8" (203 mm) wide concealed splice plate

Página 9

APPROVHFLEXCAP FLC COPINGEXISTING SLOPE WITH NAILER VERSIONANSI/SPRI ES-1 TESTEDLCoping is to be installed per Specifications and Flex's Installa

Página 10

QUICKLOCK MITERS / ACCESSORIESNon-penetrating lock without weldingSmooth, neat finished appearanceNo leak lock20 year Kynar finish warrantyCustomer Se

Página 11

FLEXCAP FLC COPINGFLAT OR TAPEREDMITERS - QUICKLOCK CONSTRUCTION WITH SEALANTOUTSIDE MITERSTANDARD OUTSIDE LEG LENGTH: WALL SIZE + 9 5/8" = LE

Página 12

FLEXCAP FLC COPINGFLAT OR TAPEREDMITERS - QUICKLOCK CONSTRUCTION WITH SEALANT"T" MITER(TAPERED SHOWN)ROOF SIDESTRAIGHT TRANSITIONAL MITER(TA

Página 13

FLEXCAP FLC COPING MITERSQUICKLOCK MITER ASSEMBLYCustomer ServicePhone: 800-969-0108Fax:610-916-9501DATE: 12/13/10DRN BY: JJCCKD BY: SAKSHT.# OFDWG# 2

Página 14

FLEXCAP FLC COPING MITERSWELDED PRE-FINISHED MITER ASSEMBLYCustomer Service Phone: 800-969-0108 Fax:610-916-9501DATE: 12/13/10DRN BY: JJCCKD BY: SAKSH

Comentários a estes Manuais

Sem comentários

Flex FLC Coping Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Flex FLC Coping. Flex FLC Coping User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Flex FLC Coping